These devices are built to last, but like any appliance, they face issues over time. If your fridge isn’t cooling properly, do not worry — many problems are fixed easily. Knowing the common causes of malfunctions you are able to troubleshoot and restore your gadget’s performance. In some cases, professional help can be needed. There are some typical reasons and their fast solutions.
Check the Power
It seems basic, but if your unit fails, it could be due to electricity. To find such problems:
- Ensure it’s fine and plugged into an outlet.
- Avoid using extension cords, as they cause power surges that disrupt the operation.
- Inspect the circuit breaker for any tripped switches and reset them if needed.
Inspect the Door Gaskets
They seal, keeping the cold air inside. If it is damaged, your unit will struggle to maintain its temperature. To check the gasket:
- Perform the dollar bill test: Place a bill halfway inside the door, and if it slides out easily, the gasket is not sealing properly.
- Look for cracks, holes, or dirt. If dirty, purify it with a damp cloth. If damaged, replace it.
Adjust the Temperature
Sometimes, the setting may be too high. The ideal t° should be 37°F for the refrigerator and 0°F for the freezer. inspect and adjust the settings to make sure they’re within the optimal range for air circulation.
Clean the Condenser Coils
They are responsible for cooling the refrigerant that circulates through the system. To clean them:
- Find these details (usually behind the grille at the bottom or back of the fridge).
- Use a brush to remove dirt and dust.
- Vacuum the area with a narrow hose attachment to clear any remaining debris.
Tiding every 6-12 months allows the device to function more efficiently.
Diagnose Faulty Parts
If none of the above solutions help, it may be due to broken elements. Common culprits include:
- Fan motor failure: If the condenser or evaporator fan isn’t working, so it is not cold enough. Look for obstructions, but if the motor is damaged, change it.
- Faulty start relay: This part allows the compressor to start. If broken, the compressor might not run or only work intermittently. A multimeter tests if it needs replacing.
- Broken thermostat: It does not signal to turn on when it should. If it happens again, put a new one.
Why Choose Onefservice?
While some of these problems can be solved on your own, others are tricky and require professional assistance. We specialize in appliance repair in NYC and surrounding areas. Whether it’s a complex renovation or a simple malfunction, our team will get your electronics functioning like new. Contact us for fast, reliable repair services.
